Drywall Holes & Patches Philadelphia, PA
Drywall holes or cracks are a common problem found in homes. Often a drywall patch is the only option, because doing patching alone can be a very difficult and time consuming project. There are several different types of drywall patching products available, all of which have different ways of working to mend a drywall hole. The most commonly used type of patching product is a drywall primer.
A drywall patch is applied to the wall surface using an adhesive. Primer is used to seal the hole and provides a smooth, somewhat translucent covering. To apply the primer, it is first mixed with paint thinner, a thin layer of latex paint or oil paint, and either a brush or roller. After a sufficient amount has been applied, the primer is allowed to dry overnight. The following day, it is time to sand the area dry and then paint the patch on.
Installing drywall repairs in a home or business without the aid of a professional can be a challenge. While there are many do-it-yourself books and videos that outline the process step by step, most people find that experimenting first time is the best way to get it right. Installing drywall in an area that is hard to reach it with a ladder is a challenge. Instead of tackling these difficult areas, most people choose to hire a handyman. If you have decided to hire a professional contractor to handle the drywall repair for you, here are some tips to help make the experience as easy and painless as possible.
Before beginning any repair, it is important to remember that drywall holes do not just go away. Depending upon the size and
color of the patch, small or large, the repair may need to be extended. If a small drywall hole only needs to be covered, put finishing nails in the patch before working. This will make the repair much easier because no cutting will be required. If a bigger drywall hole has to be repaired, do not forget to add finishing nails around the patch before continuing.
Contact Us
For small drywall holes, remove the damaged portion of the patch and use the utility knife to cut away a thin layer of drywall from one wall corner. Be sure to wear protective eyewear to avoid any cuts to your eyes. You may need to use the utility knife multiple times to cut away all of the drywall. Be careful not to cut away any insulation or cement between the wall and drywall so that no further damage will occur.
After you have completed repairing the drywall holes, use a primer to help you cover over any bare cement or insulation. This will make it much easier to install the
new drywall when it is time to replace it. It is also helpful to work on repairing your own repairs if you have some DIY skills so that you can save some money when hiring a contractor.
When installing your own drywall hole repair, make sure that the wall is level and clean before you begin cutting into it. Cut away any excess drywall that surrounds the hole and then pry up the protruding drywall with your utility knife. Use pneumatic nailers for larger holes and drywall screws for smaller holes. If the repair is going to be behind a wall, you need to attach the drywall patch to the wall before you can begin working.
Start by drilling the
pilot screw into the wall and then push the drywall screws into the drywall. You may need to cut away some extra material so that you have room to screw the new holes in. Once you have installed the drywall patch, use the edge connectors to screw the corners together. Make sure that you have included any edges that are cut so that they will be hidden when you install the trim around the edges.
More Services we Offered Includes:
